XH-M452 DC 12V LED Dual Digital Temperature Humidity Controller Independent Output 10A Relay Control Thermostat +Probe
Rs. 1,999
Quantity
Delivery Options
Sindh, Karachi - Gulshan-e-Iqbal, Block 15
Home Delivery
4 - 6 days
Rs. 35
Cash on Delivery Available
Return & Warranty
7 Days Returns
Change of mind is not applicable
Warranty not available
Positive Seller Ratings
79%
Ship on Time
99%
Seller Size

Product details of XH-M452 DC 12V LED Dual Digital Temperature Humidity Controller Independent Output 10A Relay Control Thermostat +Probe

  • 1>. Supports heating mode and cooling mode.
  • 2>. High precision 0.1 Celsius and 0.1%RH.
  • 3>. Real-time display of temperature and humidity.
  • 4>. Custom load, arbitrarily selected.
  • 5>. Simple setting.
  • 6>. Easy installation.
  • 7>. Power-down memory function.

XH-M452 use ST controller and high-precision temperature sensor probe.Good performance and accuracy.Simple panel control, wide temperature range, simple design, elegant appearance, high mechanical strength. It can be embedded industrial equipment, convenient and fast. It can be used for hatch control, equipment cabinet, air conditioning system, temperature control protection, etc.

Key Description:
1>. ‘Tempearture +’ : Short press to display start temperature;Long press to set start temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5second .(Long press is for 3second).
2>. ‘Tempearture -’ : Short press to display stop temperature;Long press to set stop temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5second .(Long press is for 3second).
3>. ‘Humidity +’ : Short press to display start humidity;Long press to set start humidity by key ‘Humidity +’ and ‘Humidity -’ and display will flashing.It will save automatically after 5second .(Long press is for 3second).
4>. ‘Humidity -’ : Short press to display stop humidity;Long press to set stop humidity by key ‘Humidity +’ and ‘Humidity -’ and display will flashing.It will save automatically after 5second .(Long press is for 3second).
5>. Note: Restore factory settings if keep press ‘Tempearture -’ and ‘Humidity +’ untill two screen flashing and display ‘888 888’ at the time.

Temperature Control:
1>. Set Start Temperature: Long press ‘Tempearture +’ to set start temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5second and then display current actual temperature.
2>. Set Stop Temperature: Long press ‘Tempearture -’  to set stop temperature by key ‘Tempearture +’ and ‘Tempearture -’ and display will flashing.It will save automatically after 5second and then display current actual temperature.
3>. Automatic mode selection:
It is Heating mode if Start Temperature is lower than Stop Temperature.
It is Cooling mode if Start Temperature is higher than Stop Temperature.
4>. Set Steps:
Focus:
Start Temp < Stop Temp (Heating mode,Automatic judgment)
Start Temp > Stop Temp (Cooling mode,Automatic judgment)
Method: Please refer to Set Start/Stop Temperature.
Heating mode example: Control water heater.Heated to 65Celsius and then stop heating.Reheat when the temperature drops to 50Celsius.
Step 1 : Set Heating mode,Start Temp < Stop Temp.
Step 2 : Long press ‘Tempearture +’ and Start Temp flashing.Set Start Temperature to 50Celsius by ‘Tempearture +’ and ‘Tempearture -’.
Step 3 : Long press ‘Tempearture -’ and Stop Temp flashing.Set Stop Temperature to 65Celsius by ‘Tempearture +’ and ‘Tempearture -’.
Cooling mode example: Control farms. Stop ventilation when temperature is 26Celsius.Refrigeration again when the temperature rises to 30Celsius.
Step 1 : Set Cooling mode,Start Temp > Stop Temp.
Step 2 : Long press ‘Tempearture +’ and Start Temp flashing.Set Start Temperature to 30Celsius by ‘Tempearture +’ and ‘Tempearture -’.
Step 3 : Long press ‘Tempearture -’ and Stop Temp flashing.Set Stop Temperature to 26Celsius by ‘Tempearture +’ and ‘Tempearture -’.
NOTE: Indicator will OFF and Load will not work If the temperature is set incorrectly.So please check if Start Temp and Stop Temp are right after set.

Humidity Control:
1>. Set Start Humidity : Long press ‘Humidity+’ to set start humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5second and then display current actual humidity .
2>. Set Stop Humidity : Long press ‘Humidity-’ to set stop humidity by key ‘Humidity+’ and ‘Humidity-’ and display will flashing.It will save automatically after 5second and then display current actual humidity .
3>. Automatic mode selection :
It is Humidification mode if Start Humidity is lower than Stop Humidity.
It is Dehumidify mode if Start Humidity is higher than Stop Humidity.
4>. Humidification mode example: Fresh storage humidification, control humidifier 50% RH to begin humidification, humidify to 80% RH stop.
Step 1 : Set Humidification mode,Start Hum< Stop Hum.
Step 2 : Long press ‘Humidity+’ and Start Hum flashing.Set Start Humidity to 50%RH by ‘Humidity+’ and ‘Humidity-’.
Step 3 : Long press ‘Humidity-’ and Stop Hum flashing.Set Stop Humidity to 80%RH by ‘Humidity+’ and ‘Humidity-’.
5>. Dehumidify mode example: Dehumidification control system in the workshop, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification.
Step 1 : Set Humidification mode,Start Hum> Stop Hum.
Step 2 : Long press ‘Humidity+’ and Start Hum flashing.Set Start Humidity to 70%RH by ‘Humidity+’ and ‘Humidity-’.
Step 3 : Long press ‘Humidity-’ and Stop Hum flashing.Set Stop Humidity to 40%RH by ‘Humidity+’ and ‘Humidity-’.

Specifications of XH-M452 DC 12V LED Dual Digital Temperature Humidity Controller Independent Output 10A Relay Control Thermostat +Probe

  • Brand
    MREECO Electronics
  • SKU
    101927903_PK-1247564215
What’s in the box
1 x XH-M452 DC 12V LED Dual Digital Temperature Humidity Controller

Ratings & Reviews of XH-M452 DC 12V LED Dual Digital Temperature Humidity Controller Independent Output 10A Relay Control Thermostat +Probe

5.0/5
4 Ratings
  • 4
  • 0
  • 0
  • 0
  • 0
Product Reviews
Filter:All star
Sort:Relevance
2 months ago
by zafar Z.Verified Purchase
product NOT functioning,it could not "On" so requested to exchange or return
0
3 months ago
by Zubair A.Verified Purchase
Good product, received on time works great.
0
Seller Response - 3 months ago
Thanks
0
Questions about this product (9)
Other questions answered by MREECO Electronics (Lahore) (9)
  • Witch one? so that device attach with controller. you have on your shop?
    Shahzad A. - 2 months ago
    No i dont deal in this item.
    MREECO Electronics (Lahore) - answered within 18 hours
  • Hi, can you recommend a device to make humidity attach with this controller.
    Shahzad A. - 2 months ago
    please buy humidity fier device
    MREECO Electronics (Lahore) - answered within 18 hours
  • both humidity and temp sensors are included
    Abdul M. - 2 months ago
    yes its include one sensor which measure both temp. and humidity
    MREECO Electronics (Lahore) - answered within 3 hours